Search
Language
Menu
Specialist in Climate Control Since 1945

Infra HT

Ideal for heating tall or poorly insulated buildings

The INFRA HT offers the option of heating without displacing air. In addition, heat reaches only the location where it is required. The short warming-up period and the lower room temperature can yield good energy savings. Savings can be as high as 40%.

The INFRA HT uses an open ceramic burner for heating. This emits a high level of heat over a relatively small surface area. This high concentration of heat enables these units to be located in tall buildings. As this unit uses open combustion, ventilation within the room must be considered. The room may be ventilated with the MARK MDV. Mark supplies the INFRA HT in 9 different capacities with the length of the unit increasing as the capacity increases.

Possible applications include:

  • construction halls
  • production facilities
  • aircraft hangars
  • stadium grandstands
  • or other open spaces.

The benefits of radiant heating include:

  • Short warm-up time
  • High floor temperature
  • Silent
  • No air movement
  • Low energy consumption
  • “zone” heating
  • Heat only where needed

Controls/to be applied for:

Mark Pintherm Infra

Article code: 0629088 Digital room thermostat, with no sensor, to switch an Infra on/off  or control high/low based on...

Zone control Infra

Order code: 3003795 Digital temperature control suitable to on/off, high/low or modulated control multiple Infra’s based on room temperature....

Mark Pintherm Infra II

Article code: 0629092 Digital room thermostat, with no sensor, to switch an Infra on/off  or control high/low or modulating...

© Mark 2019 | Disclaimer | Delivery conditions | Privacy declaration | Newsnet