Richard y muchas otras personas están dispuestos a ayudarte.
Cerrar
Interface+
Interface module for Mark air heaters
An Interface+ module can be used in two ways.
1. Power control
An externally supplied 0-10VDC signal is converted into a power control of the burner. With an Interface+ module, one G(S)+ can be controlled.
Potential free entry: Reset
Potential free exits: Malfunction
Operation
2. Connection BMS (building management system)
Settings, actual temperatures and fault codes can be read using Modbus. Settings of the OptiTherm+ can be modified.
Specifications
- Wiring: Shielded data cable (between Interface+ and air heater)
- Dimensions: 109x154x49 mm (lxwxh)
- Weight: 498 grams
- Degree of protection: IP20
- Ambient temperature: 0-40°C
Article code
- 3002866*
*Different Modbus IDs available on request.
Technical manuals
OptiTherm+ digital clock thermostat
Digital clock thermostat for controlling one or more air heaters
Ver este productoCalefacción de aire con ventilador centrífugo GC+
Calefacción respetuosa con el medio ambiente con un estándar especial
Ver este producto